46RH/47RH TRANSMISSION OVERHAUL
21 - 247
(b) Install low-reverse dram (Fig. 147). Slide
drum through rear band, onto rear support hub
and into engagement with overrunning clutch race.
(c) Coat double tab thrust washer with petro-
Fig. 147 Low-Reverse Drum Installation (46RH)
leum jelly and install it in spotface in low-reverse
drum hub.
(d) Install snap ring that secures low-reverse
drum to rear support hub (Fig. 148).
Fig. 148 Low-Reverse Drum Snap Ring Installation
(46RH/47RH)
(e) Install new O-rings on band reaction pin.
Then insert pin into case and part-way into band
link (Fig. 149).
Fig. 149 Rear Band Reaction Pin Installation (46RH)
' (f) Install rear band lever, reaction lever and
strut (Fig. 150). Be sure lever and strut are aligned
and engaged then seat reaction pin until it is flush
with case surface.
ADJUSTING
ADJUSTING
J9121-92
Fig. 150 Rear Band Levers And Strut (46RH)