BR
42RH/46RH/47RH TRANSMISSION IN-VEHICLE SERVICE
21 -147
I T E M
TORQUE
A
2-3 N»m
(15-27 in. lbs,)
B
10-12 N*m (90-110 In. lbs.)
SPEEDOMETER
ADAPTER
ADAPTER
O-RING
VEHICLE
SPEED
SENSOR
SPEEDOMETER
ADAPTER
SPEEDOMETER
PINION
J9321-385
Fig. 16 Speedometer
Components
INDEX
NUMBER
LOCATION
J9321-386
Fig. 17 Location Of Index Numbers On
Speedometer
Adapter
YOKE SEAL REPLACEMENT
(1) Raise vehicle.
(2) Mark propeller and axle yokes for alignment
reference. Then disconnect shaft at yoke and remove
shaft.
(3) Remove old seal with Seal Remover C-3985-B
(Fig.
19).
(4) Install new seal. Start seal in housing. Then
tap seal into place with Installer C-3995-A, or C-3972
(Fig. 20).
(5) Carefully guide propeller shaft slip yoke into
housing and onto output shaft splines. Align marks
made at removal and connect propeller shaft to rear
axle pinion yoke.
S W I T C H
P A R K
C O N T A C T
RH266
Fig. 18 Park/Neutral Position Switch
Contacts
SPECIAL
TOOL
C-3985-B
SEAL
J9521-57
Fig. 19 Yoke Seal Removal