24 - 28
HEATING AND AIR CONDITIONING
B R
J9424-26
Fig. 23 Clutch Cycling Pressure Switch
Fig. 24 Accumulator and Bracket
REMOVAL
(1) Disconnect the negative cable from the battery.
(2) Remove the cowl cover (refer to Group 8K,
Windshield Wiper and Washer Systems).
(3) Disconnect the vacuum hose (Fig. 26).
(4) Remove the reservoir attaching screws (Fig.
26). Remove the vacuum reservoir.
INSTALLATION
(1) Install the vacuum reservoir. Install and
tighten the vacuum reservoir screws.
(2) Connect the vacuum hose.
(3) Install the cowl cover (refer to Group 8K, Wind
shield Wiper and Washer Systems).
MANIFOLD
J9424-32
Fig. 25 High Pressure Cut-Out Switch
Fig. 26 Vacuum Reservoir
(4) Connect the negative cable to the battery.