B R
BUMPERS AND FRAME
13 -19
FRAME
SNOW
PLOW
FRAME
BUMPER
BRACKET
BUMPER
BRACKET
J9101-2
Fig. 15 Snow Plow Frame
Removal/installation
(2) Remove the nuts and bolts that attach the sup
port straps to the pivot bracket (Fig. 15).
(3) Remove the nuts, washers and bolts that attach
the pivot bracket to the vehicle frame side rails (Fig.
16).
(4) Remove the pivot bracket from the vehicle
frame rails (Fig. 16).
INSTALLATION
(1) Position and support the pivot bracket at the
vehicle frame rails with the bolt holes aligned (Fig.
16).
(2) Install the pivot bracket attaching bolts, wash
ers and nuts finger-tight (Fig. 16).
(3) Install the support strap attaching bolts and
nuts (Fig. 15). Tighten the nuts to 68 N-m (50 ft. lbs.)
torque.
(4) Tighten the pivot bracket attaching nuts to 68
N-m (50 ft. lbs.) torque.
(5) Remove the support from under the pivot
bracket.
SNOW PLOW CONTROL iOitJLE
REMOVAL/DISASSEMBLY
(1) Remove the screws and module retainers from
the instrument panel (Fig. 17).
BOLT
BOLT
FRAME
FRAME
BRACE llBRACE
Fig. 16 Snow Plow Pivot Bracket Removal/
Installation
(2) Remove the control module from the instru
ment panel (Fig. 17).
(3) Remove the module housing attaching screws
(Fig. 18).