Dodge RAM TRUCK 1500 1995 Service Manual page 1600

B R NV 021 PTO ADAPTER 21 - 319
Fig, 25 Starting input Gear Out of Bearing
Fig. 26 Removing PTO/lnput Gear Assembly
(25) Remove retaining ring that secures PTO gear
Fig. 27 Removing PTO Gear Retaining Ring
on input gear (Fig. 27). Then slide PTO gear off input
gear (Fig. 28).
(26) Remove sector shaft O-ring retainer (Fig. 29),
and O-ring (Fig. 30).
(27) Remove input bearing from front case with
Driver Handle C-4171 and Tool C-4210 or 7828,
Fig. 29 Removing Shift Sector O-Ring Retainer
Fig. 30 Removing Shift Sector O-Ring
whichever fits best (Fig. 31). Bearing can only be
removed from case interior because of bearing
locating ring.