Dodge RAM TRUCK 1500 1995 Service Manual page 1205

GENERAL DIAGNOSIS—DIESEL ENGINE 1 4 - 1 2 3
THRUST
WASHER
THRUST
WASHERS
J9514-86
Fig. 56 Gear Puller Tool Installed
J9514-89
Fig. 59 Removing Gear Puller Tool
Fig. 57 Rotating Crankshaft
THRUST
WASHER
95 N«m
[144 FT-LBS]
J9514-90
Fig. 60 Tightening Pump Nut
(28) Install a new copper delivery valve washer
into the fuel pump.
(29) Install the delivery valve assembly on top of
the sealing washer as shown in figure 61.
J9514-8
Fig. 58 Rotating Injection Pump Gear
(27) Remove the dial indicator and adaptor from
the injection pump.
CAUTION: THE FOLLOWING INSTALLATION AND
TORQUING P R O C E D U R E MUST B E F O L L O W E D E X ­
ACTLY. I M P R O P E R INSTALLATION OF THE DELIV­
ERY VALVE WILL RESULT IN DAMAGE OR L E A K S .
J9514-91
Fig. 61 Delivery Valve Assembly
(30) Lubricate the threads and clamping surface of
the delivery valve holder with a few drops of SAE 90