1 1 - 1 S 2
42RH TRANSMISSION OWERHAUL
(22) Squeeze front band together and remove band
stmt (Fig. 15).
Fig. 15 Front Band Strut Removal
(23) Remove front band reaction pin with pencil
magnet. Pin is accessible from converter housing side
of case (Fig. 18).
Fig. 16 Front Band Reaction Pan Removal
(24) Remove front band lever (Fig. 17)
Fig, 17 Front Band Lever Removal
~
_
^
=
= mm
(25) Slide front band rearward and onto driving
shell. Band will not be removed until after front/rear
clutch removal.
(28) Remove front and rear clutch units as assem
bly. Grasp input shaft, hold clutch units together and
remove them from case (Fig. 18).
J9121-124
Fig. 18 Front/Rear Clutch Removal
(27) Lift front clutch off rear clutch (Fig. 19). Set
clutch units aside for overhaul.
Fig. 19 Separating Front/Rear Clutch Assemblies