Dodge RAM TRUCK 1500 1995 Service Manual page 1273

19-30 STEERING
BR
SPOOL VALVE
VALVE BODY
ROTATE
VALVE TO
REMOVE
J93I9-37
Fig. 24 Remove and instaii Spool
J8919-48
Fig. 25 Remove and Instaii Waive Seals
(8) Adjust Thrust Bearing Preload Adjustment and
Over-Center Adjustment. Refer to Steering Gear Ad­
justments in this section.
INSTALL
(1) Install steering gear. Refer to Power Steering
Gear Replacement in this section.
RACK PISTON AND WORM SHAFT REPLACEMENT
REMOVE
(1) Remove steering gear from vehicle. Refer to
Power Steering Gear Replacement in this section.
NOTCH IN CAP
VALVE BODY PIN
J9319-38
Fig. 26 Stub Shaft Installation
DISASSEMBLE ..
(1) Remove pitman shaft and side cover. Refer to
Side Cover and Pitman Shaft Replacement in this
section.
(2) Remove housing plug end. Refer to Housing
End Plug Replacement in this section.
(3) Turn stub shaft COUNTERCLOCKWISE until
the rack piston begins to come out of the housing.
(4) Remove rack piston plug (Fig. 27).
EXTENSION . END PLUG
RATCHET
RACK 10910 0
PISTON J¥2i¥-V
Fig. 27 Remove and Install Rack Piston End Plug