Dodge RAM TRUCK 1500 1995 Service Manual page 1467

2 1 - 1 8 4
42RH
T R A N S M I S S I O N O V E R H A U L — ~ B R
SOLENOID
CONNECTOR
3-4
ACCUMULATOR
HOUSING
a
r
J9321-143
Fig. 99 Solenoid Connector Position
SOLENOID
WIRES
(NOTE
WIRE
ROUTING)
J932M42
Fig. 100 Solenoid Wire Routing
SOLENOID
ATTACHING
SCREWS
LOWER
HOUSING
SOLENOID
ASSEMBLY J932M44
Fig. 101 Solenoid Assembly Removal
(15) Remove 3-4 accumulator housing attaching
screws and remove housing from valve body (Fig.
102).
3-4
ACCUMULATOR'
HOUSING HOUSING
ATTACHING
SCREWS
S T J 9 3 2 M 4 5
Fig. 102 Removing 3-4 Accumulator Housing
(16) Remove following parts from valve body lower
housing: 3-4 shift valve and spring; pressure regula­
tor valve spring; clutch valve; clutch valve spring;
and clutch valve plug (Fig. 103).
LOWER
HOUSING
CLUTCH
VALVE AND
SPRING
3-4
SHIFT
VALVE
AND
SPRING
PRESSURE
CLUTCH REGULATOR
VALVE VALVE
PLUG SPRING J9321-146
Fig. 103 Clutch Valve And 3-4 Shift Valve Locations
(17) Bend back tabs on boost valve tube brace (Fig.
104).
(18) Remove boost valve connecting tube (Fig. 105).
Disengage tube from upper housing port first. Then
rock opposite end of tube back and forth to work it
out of lower housing.
CAUTION: Do not use tools to loosen or pry the
connecting tube out of the valve body housings.
Loosen and remove the tube by hand only.
(19) Turn valve body over so valve lower housing is
facing upward (Fig. 106). In this position, check balls