21-318
i f 021 PTO ADAPTER
Fig. I f Speedometer Gear Rear Snap Ring Removal
(18) Remove speedometer gear front snap ring
from mainshaft (Fig. 21).
(19) Remove shift rail by pulling it up and out of
fork and case (Fig. 22),
(20) Remove shift fork and shift sleeve as assembly
(Fig. 23).
(21) Separate shift fork and sleeve (Fig. 24). Note
position of sleeve for installation reference.
(22) Roll case on side and off wood blocks.
(23) Tap input gear out of bearing with plastic
mallet (Fig. 25).
(24) Remove PTO and input gear assembly (Fig.
26). Lift assembly up and out of input bearing and
case.
UBS
Fig. 24 Separating Shift Fork And
Sleeve