Dodge RAM TRUCK 1500 1995 Service Manual page 1550

42RH/46RH/47RH OVERDRIVE UIST OVERHAUL 21 - 269
CLUTCH
DRUM
OVERRUNNING
CLUTCH
ASSEMBLY
EXPAN DING-TYPE
SNAP RING
PLIERS
SUN
GEAR
OVERRUNNING
CLUTCH ASSEMBLY
SEATED IN
OUTPUT SHAFT
CLUTCH
DRUM
ANNULUS
GEAR
J9121-314
Fig. 50 Overrunning Clutch Installation
PLANETARY
GEAR
ANNULUS
GEAR
J9121-324
Fig. 51 Planetary Gear Installation
(14) Coat planetary thrust bearing and bearing
contact surface of spring plate with petroleum jelly.
This will help hold bearing in place during installa­
tion.
(15) Install planetary thrust bearing on sun gear
(Fig. 53). Slide bearing onto gear and seat it against
spring plate as shown. Bearing fits one way only.
If it does not seat squarely against spring plate,
remove and reposition bearing.
SPRING
PLATE
SPRING
PLATE SNAP
RING J9121-325
Fig. 52 Sun Gear And Spring Plate Assembly
SPRING
PLATE
PLANETARY
THRUST BEARING
J9121-326
Fig. 53 Planetary Thrust Bearing Installation
(16) Install assembled sun gear, spring plate and
thrust bearing (Fig. 54). Be sure sun gear and thrust
bearing are fully seated before proceeding.
SUN GEAR
AND SPRING
PLATE ASSEMBLY
J9121-327
Fig. 54 Sun Gear Installation
(17) Align splines in hubs of planetary gear and
overrunning clutch with Alignment Tool 6227-2 (Fig.