Dodge RAM TRUCK 1500 1995 Service Manual page 1645

23 - 20 DOORS
(7) Using a trim panel removal tool, disengage
clips holding door trim to door around perimeter of
trim panel.
(8) Disengage power mirror wire connector, if
equipped.
(9) While holding bottom of trim panel away from
door, simultaneously lift upward and forward.
(9) Separate door trim panel from inner belt
weatherstrip.
(10) Disengage power outside mirror wire connec­
tor from control switch.
(11) Separate door trim panel from vehicle.
INSTALLATION
Reverse the preceding operation.
DOOR WATER DAI
R E M O V A L
(1) Remove door trim panel.
(2) Peel water dam away from adhesive around pe­
rimeter of inner door panel (Fig. 7).
C ..
ItvK^
BELTONE
WiEATHERSEAL
Fig. 8 Inner Door Beit Weatherstrip
INSTALLATION
Reverse the preceding operation.
OUTER DOOR BELT WEATHERSTRIP
REMOVAL (FIG. 9)
(1) Roll door glass down.
(2) Remove mirror.
(3) Using a hook tool inserted into the end of the
belt weatherstrip, lift upward.
(4) Separate outer door belt weatherstrip from ve­
hicle.
INSTALLATION
Reverse the preceding operation.
DOOR
W A T E R D A M
J9423-37
Fig. 7 Door Water Dam
INSTALLATION
Reverse the preceding operation.
INNER DOOR 1ELT WEATHERSTRIP
REMOVAL
(1) Remove door trim panel.
(2) Lift inner door belt weatherstrip upward (Fig.
8).
(3) Separate inner door belt weatherstrip from
door.
OUTER BELTUNE
WEATHERSTRIP
J9423-43
Fig. 9 Outer Door Beit Weatherstrip
300R GLASS RUN WEATHERSTRIP
REMOVAL
(1) Remove door trim panel.
(2) Remove inner door belt weatherstrip.
(3) Pull door glass run weatherstrip from channel
around window opening (Fig. 10).