Dodge RAM TRUCK 1500 1995 Service Manual page 1518

46RH/47RH TRANSMISSION OVERHAUL 21 - 237
Fig. 124 Upper Housing Controi Valve Locations
(6) Turn upper housing over and remove switch
valve, regulator valve and spring, and manual valve
(Fig. 124).
(7) Remove kickdown detent, kickdown valve, and
throttle valve and spring (Fig. 124).
(8) Remove throttle plug and 1-2 and 2-3 governor
plugs (Fig. 124). Also remove shuttle valve primary
spring if not removed in prior step.
(9) Turn upper housing around and remove limit
valve and shift valve covers (Fig. 125).
(10) Remove limit valve housing. Then remove re­
tainer, spring, limit valve, and 2-3 throttle plug from
limit valve housing (Fig. 125).
(11) Remove 1-2 shift control valve and spring (Fig.
125).
(12) Remove 1-2 shift valve and spring (Fig. 125).
(13) Remove 2-3 shift valve and spring from valve
body (Fig. 125).
(14) Remove pressure plug cover (Fig. 125).
(15) Remove line pressure plug, sleeve, throttle
pressure plug and spring (Fig. 125).
WALWE BODY LOWER HOUSING
DISASSEMBLY (FIG. 126}
(1) Remove timing valve cover.
(2) Remove 3-4 timing valve and spring.
(3) Remove quick fill valve, spring and throttle
plug.
(4) Remove 3-4 shift valve and spring.
(5) Remove converter clutch valve, spring and
plug.
(6) Remove converter clutch timing valve, retainer
and valve spring.