ZH
3. Install the caliper and bracket assembly (1) on the
knuckle (2).
4. Install the caliper bracket mounting bolts (3).
Tighten the mounting bolts to 115 N·m (85 ft. lbs.).
5. Connect the brake pad wear indicator.
6. Install the wheel and tire assembly. (Refer to 22 -
TIRES/WHEELS - STANDARD PROCEDURE).
WARNING: DO NOT MOVE VEHICLE UNTIL A FIRM
BRAKE PEDAL IS OBTAINED.
7. Lower the vehicle.
8. Pump the brake pedal until the caliper pistons and
the brake pads are seated and a firm brake pedal
is achieved.
BRAKES - BASE 5 - 41