Chrysler 2005 Crossfire SRT6 Service Manual page 113

ZH
5. Install the stabilizer bar link (2). (Refer to 2 - SUS-
PENSION/REAR/STABILIZER BAR - INSTALLA-
TION).
6. Install the lower control arm. (Refer to 2 - SUS-
PENSION/REAR/LOWER
INSTALLATION).
7. Install the rear axle carrier (1) by raising it up and
installing the four bolts to the frame. Tighten to 90
N·m (66 ft. lbs.).
8. Install the rear axle differential carrier. (Refer to 3 -
DIFFERENTIAL & DRIVELINE/REAR AXLE/REAR
CARRIER - INSTALLATION).
CONTROL ARM -
REAR SUSPENSION 2 - 89