Chrysler 2005 Crossfire SRT6 Service Manual page 108

2 - 84 REAR SUSPENSION
13. Remove the rear shock absorbers (1). (Refer to 2
- SUSPENSION/REAR/SHOCK - REMOVAL).
CAUTION: Do not disconnect any of the fuel lines
from the fuel pump assembly.
14. Remove the fuel pump mounting bolts.(Refer to
14 - FUEL SYSTEM/FUEL DELIVERY/FUEL
PUMP - REMOVAL).
15. Using wire or cord, hang the fuel pump from the
rear strut assembly. Support the fuel pump firmly
to prevent the weight of the pump from being sup-
ported by the fuel line.
16. Remove the propeller shaft assembly from the
rear axle differential carrier. (Refer to 3 - DIFFER-
ENTIAL & DRIVELINE/PROPELLER SHAFT -
REMOVAL).
17. Remove the rear differential carrier. (Refer to 3 -
DIFFERENTIAL & DRIVELINE/REAR AXLE/REAR
CARRIER - REMOVAL).
18. Remove the front two bolts (1) from the rear axle
carrier attaching it to the frame.
ZH