2 - 92
REAR SUSPENSION
16. Install the rear portion of the exhaust system
(Refer to 11 - EXHAUST SYSTEM/MUFFLER -
INSTALLATION).
17. Install the rear disc brake calipers and bolts (1).
(Refer to 5 - BRAKES/HYDRAULIC/MECHANI-
CAL/DISC BRAKE CALIPERS - INSTALLATION).
18. Install the wheel and tire assembly. (Refer to 22 -
TIRES/WHEELS - STANDARD PROCEDURE).
Note: Final torque for the rear support bracket
must be made at curb weight.
19. Install the rear support bracket (1) by, installing
the support bracket then installing the bolts (2).
Tighten to 60 N·m (44 ft. lbs.).(Refer to 13 -
FRAME
&
BUMPERS/FRAME/BRACKET
INSTALLATION).
20. Check vehicle alignment. (Refer to 2 - SUSPEN-
SION/WHEEL ALIGNMENT - STANDARD PRO-
CEDURE).
-
ZH