Cruise Control Actuator/Cable Replacement - Honda Civic Service Manual

Cruise Control
Cruise Control Actuator/Cable Replacement
1 . Fully open the cruise control link by hand, then
remove the cruise control cable {A) from link.
Loosen the locknut (B), and remove the cable from
the bracket.
Disconnect the 4P connector, and remove the three
bolts securing the cruise control actuator.
2 .
6 x 1 , 0 m m
12 N.m (1.2 kgf.m,8.7 lbf.ft)
4-44
\rla
3 .
Remove the actuator cover (A), then remove the
actuator cable (B) from the cruise control actuator.
Install in the reverse order of removal, and adjust
the free play at the throttle linkage after connecting
the actuator cable.
4 .