Analog Gateway; Configuring Keypad Features - AudioCodes Mediant 500L User Manual

User's Manual
28

Analog Gateway

This section describes configuration of analog settings.
28.1

Configuring Keypad Features

The Keypad Features page lets you configure key sequences that can be pressed on
telephone keypads of FXS endpoints to activate and deactivate the following features:

Call Forward

Caller ID Restriction

Hotline for automatic dialing

Call Waiting

Rejection of Anonymous Calls
Note:
•
The Keypad Features page is applicable only to FXS interfaces.
•
The method used by the device to collect dialed numbers is identical to the
method used during a regular call (i.e., max digits, interdigit timeout, digit map,
etc.).
•
The activation of each feature remains in effect until it is deactivated (i.e., not
deactivated after a call).
•
For a description of the keypad parameters, see 'Telephone Keypad Sequence
Parameters' on page 1193.

To configure keypad sequences:
1. Open the Keypad Features page (Setup menu > Signaling & Media tab > Gateway
folder > Analog Gateway > Keypad Features).
Figure 28-1: Configuring Phone Key Sequences to Activate Various Services
Version 7.2 611 Mediant 500L Gateway & E-SBC
28. Analog Gateway