Searching For Configuration Parameters - AudioCodes Mediant 1000B User Manual

User's Manual
Item # Button
4 Show/Hide
5 -
6 -
7 -
Some tables also provide the Up and Down buttons for changing the position (index
number) of a selected table row. These buttons become available only if the table contains
more than one row.
You can also define the number of rows to display on the page and to navigate between
pages displaying multiple rows. This is done using the page navigation area located below
the table, as shown in the figure below:
Item #
1 Defines the page that you want to view. Enter the required page number or use the
following page navigation buttons:

- Displays the next page

- Displays the last page

- Displays the previous page

- Displays the first page
2 Defines the number of rows to display per page. You can select 5 or 10, where the
default is 10.
3 Displays the currently displayed page number.
6.1.7

Searching for Configuration Parameters

You can locate the exact Web page on which a specific parameter appears, by using the
Search feature. To search for a Web parameter, you must use the ini file parameter name
as the search key. The search key can include the full parameter name (e.g.,
"EnableSyslog") or a substring of it (e.g., "sys"). If you search for a substring, all
parameters containing the specified substring in their names are listed in the search result.
Version 6.8
Toggles between displaying and hiding the full configuration of a
selected row. This configuration is displayed below the table (see Item
#6) and is useful for large tables that cannot display all its columns in
the work pane.
Selected index row entry for editing, deleting and showing
configuration.
Displays the full configuration of the selected row when you click the
Show/Hide button.
Links to access additional configuration tables related to the current
configuration.
Figure 6-11: Viewing Table Rows per Page
Table 6-4: Row Display and Page Navigation
Description
49 Mediant 1000B Gateway & SBC
6. Web-Based Management