User's Manual
27
Analog Gateway
This section describes configuration of analog settings.
Note:
27.1
Configuring Keypad Features
The Keypad Features page enables you to activate and deactivate the following features
directly from the connected telephone's keypad:
Call Forward
Caller ID Restriction
Hotline for automatic dialing
Call Transfer
Call Waiting
Rejection of Anonymous Calls
Notes:
Version 6.6
The Analog Gateway submenu appears only if the device is installed with an
FXS or FXO module.
•
The Keypad Features page is available only for FXS interfaces.
•
The method used by the device to collect dialed numbers is identical to
the method used during a regular call (i.e., max digits, interdigit timeout,
digit map, etc.).
•
The activation of each feature remains in effect until it is deactivated (i.e.,
not deactivated after a call).
•
For a description of the keypad parameters, see 'Telephone Keypad
Sequence Parameters' on page 793.
389
27. Analog Gateway
Mediant 600 & Mediant 1000