Pitch Shift Mod. (Pitch Shift Modulation); 040: Rotary Speaker - Korg TRITON Extreme Manual

Music workstation/sampler
Hide thumbs Also See for TRITON Extreme:
Table of Contents

Advertisement

039: Pitch Shift Mod.
(Pitch Shift Modulation)
This effect modulates the detuned pitch shift amount using an
LFO, adding a clear spread and width to the sound by pan-
ning the effect sound and dry sound to the left and right. This
is especially effective when the effect sound and dry sound
output from stereo speakers are mixed.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
+
Pitch Shifter
Right
LFO: Tri / Sqr
Pitch Shift [cent]
a
Sets the pitch difference from the input signal
LFO Waveform
b
Selects LFO Waveform
LFO Frequency [Hz]
Sets the LFO speed
Src
c
Selects the modulation source of LFO speed
Amt
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base Note
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Depth
Sets the LFO modulation depth for pitch shift amount
Src
e
Selects the modulation source of the depth of modulation
Amt
Sets the modulation amount of the depth of modulation
Pan
f
Sets the panning effect sound and dry sound separately
Wet/Dry
Sets the balance between the effect and dry sounds
Src
g
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
a: Pitch Shift [cent], e: Depth
These parameters set the amount of pitch shift and amount of
modulation by means of the LFO.
Pitch Shift Mod - Pitch Shift / Depth
Pitch
Original Pitch
f: Pan, g: Wet/Dry
The Pan parameter pans the effect sound and dry sound to the left
and right. With L, the effect sound is panned left, and the dry
sound is panned right. With a Wet/Dry = Wet setting, the effect
and dry sound will be output in a proportion of 1:1.
Wet / Dry
Pan
Wet / Dry
–100...+100cent
Triangle, Square
0.02...20.00Hz
Fx:009,
Off...Tempo
–20.00...+20.00Hz
Off, On
Fx:009,
MIDI, 40...240
Fx:009
Fx:009
x1...x16
Fx:009
–100...+100
,
Off...Tempo
–100...+100
L, 1:99...99:1, R
Dry, 1:99...99:1, Wet
,
Off...Tempo
–100...+100
LFO Waveform=Triangle
Depth (+value)
Pitch Shift (+ value)
LFO Waveform=Square
Depth (–value)

040: Rotary Speaker

This effect simulates a rotary speaker, and obtains a more real-
istic sound by simulating the rotor in the low range and the
horn in the high range separately. The effect also simulates the
stereo microphone settings.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Horn
Rotary Speaker
+
Rotor
Speaker Simulation
Right
D
-mod
Mode Switch: Rotate/Stop
D
-mod
Speed Switch: Slow/Fast
D
-mod
Manual Speed Control
Mode Switch
Switches between speaker rotation and stop
Src
Selects the modulation source that toggles between rotation and
a
stop
Sw
Selects switching mode of the modulation source that toggles
between rotation and stop
Speed Switch
Switches the speaker rotation speed between slow and fast
Src
b
Selects the modulation source that toggles between slow and fast
Sw
Selects switching mode of the modulation source that toggles
between slow and fast
Manual Speed Ctrl (Manual Speed Control)
c
Selects the modulation source in case the rotation speed is changed
directly
Horn Acceleration
How quickly the horn rotation speed in the high range is switched
d
Horn Ratio
Adjusts the (high-range side) horn rotation speed. Standard value is
1.00. Selecting "Stop" will stop the rotation
Rotor Acceleration
Determines how quickly the rotor rotation speed in the low range is
switched
e
Rotor Ratio
Adjusts the (low-range side) rotor rotation speed. Standard value is
1.00. Selecting "Stop" will stop the rotation
Horn/Rotor Balance
f
Sets the level balance between the high-range horn and low-range
rotor
Mic Distance
Sets the distance between the microphone and rotary speaker
g
Mic Spread
Sets the angle of left and right microphones
Wet/Dry
Sets the balance between the effect and dry sounds
Src
h
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
a: Sw
This parameter sets how the modulation source switches between
rotation and stop.
When "Sw" = Toggle, the speaker rotates or stops alternately each
time you press the pedal or operate the joystick.
Each time the value for the modulation source exceeds 64,
the speaker rotates or stops alternately.
Wet / Dry
Mic Distance
Horn/Rotor
Mic Spread
Balance
Wet / Dry
Rotate, Stop
Off...Tempo
Toggle, Moment
Slow, Fast
Off...Tempo
Toggle, Moment
Off...Tempo
,
0...100
Stop, 0.50...2.00
0...100
Stop, 0.50...2.00
Rotor, 1...99, Horn
0...100
0...100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
239

Advertisement

Table of Contents
loading

Table of Contents