To Set The Custom Paint Menu - Sony RCP-1500 Operation Manual

To reset the function assignments of assignable
adjustment knobs to their default settings
1
[Default All]
Press .
The confirmation message screen appears.
2
[OK]
Press .
The function assignments of assignable adjustment
knobs are reset to their default settings.
3
[Save]
Press .
The confirmation message screen appears.
4
[Save]
Press .
The function assignments of assignable adjustment
knobs are saved.
If you exit the menu without saving, the function
assignments will not be reflected.

To set the custom paint menu

If you register the custom paint menu containing frequently
used paint menu items, you can quickly display the necessary
paint menu items to configure settings.
1
Enter engineer mode. (page 52)
2
Press the MENU button.
The menu closes and the control panel remains in
engineer mode.
3
Display the RCP Config screen. (page 51)
RCP Config
Display
Customize
/Sound
Date
Network
/Time
4
[Customize]
Press .
The Customize screen appears.
RCP Customize
Menu SW
Customize Customize
Standard
Ind
Exit
VR
Mode
Setting
Infor-
Security
mation
Backup
Exit
Custom VR
Menu SW Customize
5
[Menu Customize]
Press
The Menu Customize screen appears.
Menu Customize
Custom Paint Menu
TOP
1 Detail
2 Skin Detail
3 Gamma
4 Knee
Paint Item
White
Black
Flare
Detail
Skin Detail
This screen contains two lists, one at the top and the other
at the bottom. The top list displays the custom paint menu
items. The bottom list displays the paint menu items that
can be added to the custom paint menu. You can edit the
custom paint menu by selecting paint menu items in the
bottom list and adding them to the top list.
To add a paint menu item to the custom paint menu
1
Turn the adjustment knob on the far left to select the
paint menu item to add to the custom paint menu from
the bottom list.
Turning the paint adjustment knob on the far left moves
the cursor (B) in the bottom list up or down. If you align the
cursor with the paint menu item to add to the custom paint
menu, that paint menu item is displayed in amber.
2
Turn the SELECT knob to specify the position to
insert the paint menu item in the top list.
Turning the SELECT knob moves the cursor (B) in the top
list up or down. Align the cursor with the item above the
position to insert the paint menu item. The paint menu
item at the cursor position is displayed in amber.
3
[Insert]
Press .
The paint menu item selected in the bottom list is added
below the item at the cursor position in the top list.
4
Repeat steps 1 to 3 if you want to add multiple paint
menu items.
5
[Line]
Press to insert a separator line between items
in the custom paint menu if necessary.
The separator line is inserted below the item at the cursor
position in the top list.
6
[Save]
Press .
The confirmation message screen appears.
7
[Save]
Press .
The contents of the custom paint menu are saved and
registered to the control panel.
.
Exit
Delete Save
Insert
Default
Save
All
Settings
47