Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 68

When routing cables to the appropriate connector in the KSU the Removable
Access Panel can be temporarily removed to allow easy access to the various KSU
connections.
Important! Replace the Removable Access Panel after all connections
have been made. The panel is required to be in position to comply with FCC
regulations.
The 66Ml‐50 is split into a left half and right half for wiring terminations.
Each row is conductive between the left two columns and the right two columns.
This is the source of the term "Split 50."
Terminate cable pairs from the KSU and from telephone locations on outer column
pins, one lead only per pin. NEVER terminate two wires on one pin! This is
referred to as "double‐punching" and causes poor connection of wires on the
terminal.
Emerald ICE Installation, Programming & Maintenance Manual
3-11