Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 275

8-14
Emerald ICE Installation, Programming & Maintenance Manual
7. Press the softkey beneath chg to change/enter the digital port directory
number where the DSS is connected.
8. Enter the directory number of the digital port where the DSS Console is
connected, then press the softkey beneath save .
9. Press the softkey beneath next to enter more DSS Console data.
10. Enter the next DSS Unit number (1‐12) to program and press the softkey
beneath show .
11. Press the Volume button (
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. Select RP, System Resource, DSS Allocation from the menu bar to display
the following window.
3. Click on the DSS Unit Number in the Display Area. The Dir No. and DSS
Owner information will appear below in the programming area. If the Dir
No. and DSS Owner fields are empty in the Display Area, nothing will be
displayed in the Programming Area.
4. Using the drop‐down list in the Dir No. field, select a DSS to allocate (up
to 12 DSS Consoles may be added to the system). When allocating DSS
Consoles, two directory numbers are required, the actual digital extension
port directory number where the DSS Console is connected (DIR No.) and
the Digital Extension Directory Number of the extension to which this DSS
Console is to be associated (DSS Owner).
5. Using the drop‐down list in the DSS Owner field, select the directory
number of the extension to be associated to this DSS Console.
v
) to return to the DB Item Select Screen