Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 250

RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. From the toolbar select RP, Call Handling,Timing to display the RP:
Calling Handling: Timing (Part 1) window. Click on the More button to
display the following:
3. Using the drop‐down list in the SLT Hook Flash‐Start: field, select a Start
range setting, in milliseconds. This timer indicates the minimum time that
an analog/SLT must flash the hook‐switch to be considered a valid
flash‐hook request. A hook‐flash that is shorter than this timer is
considered a mistake; no action is taken. Available selections are 60,
100‐1400 milliseconds.
4. Using the drop‐down list in the STL Hook Flash‐End: field, select an End
range setting, in milliseconds. This timer indicates the Maximum time that
an analog/SLT must flash the hook‐switch to be considered a valid
flash‐hook request. A hook‐flash that is longer than this timer is
considered an On‐Hook {hang up} request. Available selections are
100‐1400 milliseconds.
5. Click on the Close button to close the window without making changes or
click on the Update button and follow the prompts to save the database
changes.
Emerald ICE Installation, Programming & Maintenance Manual
7-69