Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 410

3. Press [chg] . The following will be displayed.
4. To program the button, you must know the code type. Use
Feature/Directory/Suffix Code Lookup (Refer to Section
feature and code you want to program.
a. To program a directory number, press [dir] .
b. Enter the appropriate directory number and then press [save] . If
you make a mistake, use [bksp] and [chg] to re‐enter the number.
c. To program a feature code, press [pgm] .
PGM
d. Press the
e. Enter the feature code for example, enter
[save] .
5. Continue programming other Feature/DSS Buttons or lift/replace the
handset to exit this programming.
Operational Notes
• If you dial an invalid code you will hear error tone and the Deluxe Telephone
display will show " CODE UNAVAILABLE ."
• In some cases a user can program a Feature/DSS Button for a specific CO line
although access is restricted to that line via database programming. In this
situation, the telephone is still governed by database programming and
would still be unable to access the CO line if restricted.
• Valid feature codes must be in the form of either "Pn" or "Pnn" where "P" is
the Feature/DSS Button and "n" is either a single‐digit or two‐digit code,
including asterisk (*) and pound (#) dialed from the dial pad.
• Any Feature/DSS Button programmed with a code previously assigned to a
different Feature/DSS Button will cause the previously programmed Fea‐
ture/DSS Button to become unassigned.
• Feature/DSS Buttons can be cleared of any feature code/directory number by
pressing [save ] before entering a code/number.
SELECT FUNCTION
dir pgm
DIR NUMBER :_
bksp save
PGM CODE:_
bksp save
p
button.
Emerald ICE Installation, Programming & Maintenance Manual
13.30
) to locate the
chg
chg
#
for DND and then press
4
13-45