Auto Redial - Tadiran Telecom Emerald ICE Installation & Maintenance Manual

16. Using the drop‐down list in the Auto Atendant Service: field, select the
appropriate operation mode for automated attendant for this CO line.
Available selections are Always, Never, Day, and Eve .
17. Continue other programming or click on the Close button to close the
window without making changes or click on the Update button and follow
the prompts to save the database changes.

Auto Redial

7.5
Auto Redial may be used to dial the last number dialed. The system will
automatically dial the number and then wait for a predetermined time period.
Following this predetermined time period if no action is taken the system will
then hang up and the redial cycle will continue until the number of attempts
designated in programming is reached.
The Feature Code
on the Deluxe Telephone to be used with the Auto Redial feature.
If a Feature/DSS button has been programmed for use with Automatic Redial, the
button may be used to invoke the feature. While the feature is active the LED of
that button will be lit steady red. During dialing attempts the LED of that button
will flash red.
The system will continue redial attempts until:
• Call rings through and caller picks up,
• The maximum number of attempts is reached,
• Any other feature is used on the telephone.
The number of redial attempts and the timed interval between attempts are set in
system programming and are not changeable at the extension level.
If all extension accessible CO Lines or the CO Line group are busy at the time of
an Automatic Redial attempt, that attempt will count as a valid attempt and
reduce the remaining number of attempts.
Default Settings:
Attempts is set at 8 seconds
Interval is set at 60 seconds
Waiting Time is set at 15 seconds
p78
can be programmed under a Feature/DSS button
PGM
Emerald ICE Installation, Programming & Maintenance Manual
7-15