Hold - Hold Reminder, Common (System), I-Hold Indication - Tadiran Telecom Emerald ICE Installation & Maintenance Manual

Hold – Hold Reminder, Common (System), I-Hold Indication
7.17
Description
h
You may place any CO line on System Hold by pressing the Hold ( ) button.
When you place a line on System Hold , the green lamp for that line will flash at the
I‐Hold rate. This system‐hold line will flash the red lamp at all other extensions.
I‐Hold indication allows you to easily distinguish between a call you placed on
hold at your telephone and calls placed on hold at other telephones. When you
place a call on System Hold , the associated line lamp will flash at the System Hold
rate using the green lamp to indicate that this is your holding line. The same held
CO line at other extensions will flash at the System Hold rate using the red lamp.
h
Pressing Hold ( ) will place a conference on Exclusive Hold if you are the
controlling party and you temporarily exit to add another party.
When a conference call is placed on Hold, the steady lamp indication at the other
extension(s) remains steady (follows Exclusive Hold functions).
Any party who is placed on Hold will hear music only if available through the
external music source connection.
Calls placed on Exclusive (private) Hold , which have exceeded the Exclusive Hold
programmed time, and calls recalling from a CO line transfer, will be placed on
System Hold automatically.
There is a distinctive flash rate for a CO line that is on System Hold .
Default Settings:
Hold Reminder is set at 60 seconds. (Range is: 0‐90 seconds, 0 disables the Hold
Reminder function.)
SLT Hold Recall is set at 0.5 minutes. (Range is 0‐5.0 minutes.)
EKT Hold Recall is set at 0.5 minutes. (Range is 0‐5.0 minutes.)
7-54
Emerald ICE Installation, Programming & Maintenance Manual