Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 297

8-36
Emerald ICE Installation, Programming & Maintenance Manual
28. Enter the new telephone number with special characters as required.
Pause = PGM + 70
Flash = PGM + 3
Speed Numbering Programming=PGM+1 + next speed number (600‐699).
29. Press the softkey beneath save . The speed dial number and the new
contents are displayed.
30. Press the softkey beneath next] and enter the next speed dial number to
change and follow the conventions above.
Or...
31. Press the Hold button (
previous menu level.
Then...
32. Press the Volume button (
Screen or exit programming.
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. From the toolbar select RP, SPD. No. Assignment and Programming to
display the following:
System SPD
Sytem SPD
Assignment
Extension SPD
h
) to exit this programming and return to the
v
) to return to the DB Item Selection
Apply Button
Apply Button