Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 174

RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. Select RP, CO Line from the menu bar to display the following window.
3. Using the drop‐down list in the CO Line: field, select a CO Line to
program.
4. Using the drop‐down list in the CO‐Ring Type: field, select a Ring Type to
distinguish the ring type of the CO Line selected.
5. Click on the Update button, follow the prompts and repeat steps 3 and 4
for other CO lines, as necessary.
6. Continue other programming or click on the Close button to close the
window without making changes or click on the Update button and follow
the prompts to save the database changes.
Emerald ICE Installation, Programming & Maintenance Manual
6-25