Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 230

RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. Select RP, Call Handling, Timing from the menu bar. When the RP: Call
Handling‐Dialing (Part 1) window appears, click on the More button to
display the following window.
3. Using the drop‐down list in the Start: field, selelct an SLT Hook Flash start
time, in microseconds. Available selections are 60 , and 100 ‐ 1400
microseconds in 100 microsecond increments. The Start Time can be set
very low to detect very fast operation of the hook‐switch but care should
be taken when using low Start settings since the timing may allow line
noise to trigger a flash command.
4. Using the drop‐down list in the End: field, selelct an SLT Hook Flash end
time, in microseconds. Available selections are 100 ‐ 1500 microseconds in
100 microsecond increments.The End Time can be set very high to detect
very slow hook‐flash operations but care should be taken when using high
End settings since the timing may not allow the triggering of On‐Hook
commands in an acceptable period for the user.
5. Continue other programming or click on the Close button to close the
window without making changes or click on the Update button and follow
the prompts to save the database changes.
Emerald ICE Installation, Programming & Maintenance Manual
7-49