Summary of Contents for Tadiran Telecom Emerald ICE
Page 2
The information contained in this document is proprietary and is subject to all relevant copyright, patent and other laws protecting intellectual property, as well as any specific agreement protecting TADIRAN TELECOM, INC. (herein referred to as the “Manufacturer”) rights in the aforesaid information. Neither this document nor the information contained herein may be published, reproduced or disclosed to third parties, in whole or in part, without the express, prior, written permission of the Manufacturer.
Page 3
Record of Revisions Revision Date of Issue Supercedes Major Changes - Brief Description Initial Release September 28, 2003...
Document Overview The purpose of this document is to provide operational instructions on the use of an SLT Telephone used in conjuction with the Emerald ICE Telephone System. It is divided into the following sections: Section 1 - Introduction - this section describes the basic Emerald ICE system, an an overview of this manual and the applicable documentation.
Single Line (Analog) Telephone Features Telephone Setup Alarm (Extension) Feature Code: Activate Dial , hhmm (24hr format), then for once, for repeated daily. Cancel #*92. Dial SLT User Guide...
Call Forward (Extension) Feature Code: Activate Call Forward may be invoked for several operation modes. Each mode may also be invoked: =CO calls only, =CO and Intercom calls, =Intercom calls only. Immediate Forward: dial , (ext #), option. Busy Forward: dial , (ext #), option.
Extension Password Feature Code: 0000 Dial , password ( set at factory), then input new password. Hotline Feature Code: Setup Dial , ext # or speed bin #, – (0–9 seconds delay). Whenever the telephone is taken off-hook, this destination is called. Cancel #*9* Dial...
Making Calls Outgoing Call (CO Line) Feature Code: Dial CO Line code (other codes may be applicable). Listen for CO Line dial tone; then dial the telephone number. Intercom Call (To Another Extension) 101-156 Feature Code: Listen for dial tone and dial the extension number. Call Brokering (Handling Two Calls) Feature Code: {FLASH} +...
Conference (3 party max.) Feature Code: {FLASH} + While on a call - press {FLASH} (hook-switch flash). Make a second call. Press {FLASH} (hook-switch flash), then dial Conference, Meet Me (4 Parties Max.) Feature Code: Transfer a caller to a Meet Me Conference 1.
Speed Dial Extension System Setup Dial (speed#bin), input telephone #. Press FLASH (hook-switch flash). Dial the Speed Dial bin ( In Progress Features: Analog Ports Calling Features Call Back (CO Line/Extension) Feature Code: When you try to access an outside line or extension and get a busy tone, dial Call Park (Answer) Feature Code: Dial...
Camp On (Extension) Feature Code: When you call a busy extension, dial and wait for them to answer. Flash (CO Line) Feature Code: While connected to a CO Line, momentarily press the hook switch (FLASH) then dial Forced Intercom Tone Ring Feature Code: When you call an extension that is in Voice Announce mode and wish to tone ring that extension, dial...
Messaging (Call Me) Feature Code: Set: When you have called an extension and wish to leave a message, press #*96 Cancel: Dial , then the ext # where your message was previously left. Monitor (Extension/CO Line[Privacy Alert]) Feature Code: When you dial an extension that is busy, dial .
Tone Ring (Forced) Feature Code: When a Deluxe Telephone in Voice Announce mode is called, you can change the alert to tone by pressing Transfer While connected on a call (CO Line or intercom extension), press {FLASH} (hook switch flash). Listen for dial tone, then dial the destination where this call is to be transferred (extension, UCD Group, Virtual Number, etc.) Wait for the caller to answer - to screen the transfer.
Page 19
USA Headquarters Tadiran Telecom, Inc. 4 Tri Harbor Court Port Washington, NY 11050 Tel. +1-516-632-7200, Fax. +1-516-632-7210 Visit us at our website http://www.tadiran-us.com Email: support@tadiran-us.com E me ra l d I CE S LT M o de l Tel ep h on e...