Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 190

Default Settings:
No CO Lines are set for automated attendant operation.
The Answer Position is set to Extension "401" for DAY, ALT and EVE modes.
Ring Time to Answer is set at "0" seconds.
No Answer Time is set at "20" seconds.
Drop No digits Dialed is set to "No."
XFR Mode set to RBT (Ring Back Tone).
Waiting Code set to "#."
Inquiry Code set to "*."
DISA Code set to "9."
Deluxe Telephone Programming
1. Access the Deluxe Telephone Programming Features as described in Section
3.2.
2. Enter 03-48 and press the softkey beneath save . This advances to the
AUTO ATTENDANT programming screen.
3. Press the softkey beneath save and then press the softkey beneath show .
RING_T TO ANS displays.
4. Press the softkey beneath chg to change the RING_T TO ANS . This
timer sets the amount of time that a caller will hear ring‐back before the
line is answered by the auto attendant. The new answer delay time can be
from 0‐20 seconds
5. Press the softkey beneath save .
6. Press the softkey beneath next . RING NO ANS displays.
7. To change the RING NO ANS timer press the softkey beneath chg . This
timer sets the amount of time that a call rings the auto attendant before
being routed to the designated Answer Position in the event that all Auto
Attendant ports are in use and unavailable to handle the call. Each time
the the softkey beneath chg is pressed the value is updated to the next
valid time interval. Valid times are 10‐90 seconds in 10 second increments.
8. Press the softkey beneath next . DROP NO EX # displays.
9. To change the DROP NO EXT # operation toggle the softkey beneath
chg for Y/N . When set to Y , the caller will be automatically dropped by
the system if they do not make a selection or dial a valid extension
Emerald ICE Installation, Programming & Maintenance Manual
7-9