Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 137

5-48
Emerald ICE Installation, Programming & Maintenance Manual
ii. Enter the extension directory of the analog port to program into
this Member and press the softkey beneath save .
iii. Press the softkey beneath next .
iv. Continue from the softkey beneath chg above to program all
voicemail ports as members of this UCD Group.
v. Press the Hold button (
or press the Volume button (
Selection Screen or exit programming.
c. Enter 06-02 ‐ Tenant Group ‐ 01 (Voicemail Hunt Group, where 1‐3 is
the Tenant Group {usually "1"}) and press the softkey beneath save .
This advances to voicemail Table for Tenant 1 – Hunt Group.
Press the softkey beneath chg until the UCD Group to be used as
i.
the VM Hunt Group displays. (UCD Group where all of the VM
type analog ports are programmed as Members.)
ii. Press the softkey beneath next to continue programming the
various call handling digits (Prefix/Suffix).
iii. Press the Hold button (
or press the Volume button (
Selection Screen or exit programming.
d. Enter 6-02 ‐ Tenant Group ‐ 02-01 (VM Table – Prefix Table –
ICM/VM, where 1‐3 = Tenant Group) and press the softkey beneath
save .
Press the softkey beneath chg .
i.
ii. Enter the required digits to identify this call as originated at the
subscriber phone.
iii. Press the softkey beneath save .
iv. Press the softkey beneath next to continue programming the
various call handling digits (Prefix/Suffix).
v. Press the Hold button (
or press the Volume button (
Selection Screen or exit programming.
e. Enter 06-02 ‐ Tenant Group ‐ 02-02 (VM Table – Prefix Table –
Transfer, where 1‐3 = Tenant Group) and press the softkey beneath
save .
Press the softkey beneath chg .
i.
ii. Enter the required digits to identify this call as transferred to this
subscriber MB.
h
) to return to the previous menu level
v
) to return to the DB Item
h
) to return to the previous menu level
v
) to return to the DB Item
h
) to return to the previous menu level
v
) to return to the DB Item