Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 253

7-72
Emerald ICE Installation, Programming & Maintenance Manual
3. Using the drop‐down lists in the Inter‐Digit:, Tone Time:, and Break Time:
fields, select values, in milliseconds for the following:
Inter‐Digit: This is the system timing, in milliseconds of the time between
digit dialing signals. (Dial Pulse and DTMF modes use this timer)
Tone Time: This is the system timing, in milliseconds of duration of Tone
(DTMF) signal generated by the system for each DTMF digit.
Break Time: Break time is the system timing in milliseconds of Pulses (loop
current interruption) generated by the Emerald ICE system to signal the CO
for Pulse dialing requirements.
4. Click on the Close button to close the window without making changes or
click on the Update button and follow the prompts to save the database
changes.