Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 131

5-42
Emerald ICE Installation, Programming & Maintenance Manual
Program the Voice Announcer UCD Group:
7. Enter 06-01- UCD Group -02 , then press the softkey beneath save .
This advances to the selected UCD Group (01‐24) UCD ATTRIB
programming screen.
8. Press the softkey beneath chg until VA is displayed.
9. Press the softkey beneath next . This advances to the MEMBER
programming screen for the selected UCD Group.
10. Press the softkey beneath show . This advances to the first (of twenty‐four)
members of this UCD Group.
11. Use the softkey beneath back and the softkey beneath next to select the
UCD Group Member for programming.
12. Press the softkey beneath chg .
13. Enter the extension directory number of the analog extension to assign as
this VA UCD Group Member.
14. Press the softkey beneath save .
15. Repeat from the softkey beneath next , the softkey beneath back for
additional Members.
16. Press the Hold button (
Volume button (
programming.
h
) when finished entering members or press the
v
) to return to the DB Item Selection Screen or exit