Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 385

13-20
Emerald ICE Installation, Programming & Maintenance Manual
To Answer a Call Back:
1. When the call back begins, your extension will ring a special call back alert
ring for 30 seconds and the display shows:
a. Lift the handset or press
Or...
b. Press the softkey beneath reply ] to activate Call Back.
To cancel all active call backs prior to receiving Call Back Alert ringing:
p##
PGM
1. Press
Operational Notes
If you press the softkey beneath del] during the Call Back Alert ringing, the
•
Call Back will be cancelled and the display will show:
• To activate a Call Back at an extension that is in the Voice Announce mode, you
must first Force Tone Ring. (Refer to
• If the call back is not answered during the reply alert ringing, the response
message will be displayed until you press either the softkey beneath reply
] , or the softkey beneath del] .
• The call back process begins when both your extension and the called party's
extension are in idle.
CALL BACK TO XXX
reply del
s
,,
CBCK DELETE XXX
Section 4.11
)