Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 462

4. Press the softkey beneath show to add Day members to the ring list. By
default, NULL will be displayed until a new member is added. Enter a
3‐digit extension from using the telephone keypad and then press the
softkey beneath next to add additional extensions.
5. When all of the desired extensions have been added, press the
to return to the Day programming screen. Press the softkey beneath next
to access the Night Mode programming screens. When the Emerald ICE
system is in the Night Service Mode, 1 extension/Hunt Group (UCD) may
be assigned to ring for the Door Phone.
6. Enter a 3‐digit extension from using the telephone keypad. If changing an
extension, press the softkey beneath chg to change an existing extension.
If no extensions were entered previously, NULL will be displayed.
7. When the desired Night mode extension has been added, press softkey
beneath next to advance to the Unlock Code programming screen. If
connected to the Door Phone, any dial pad digit can be pressed to trigger
the relay and operate the door opener. Press the soft key beneath chg to
scroll through Unlock Code characters. (Range: 0~9, *, #; Default: #)
8. When the desired Unlock Code has been selected, press the softkey
beneath next to access the Lock Open Time programming screen. This is
a timer that determines how long the relay operates when the Unlock
Code is dialed. Enter a value from the telephone keypad and press the
softkey beneath save to save your entry. Press the softkey beneath chg
to change an existing Lock Open Time. (Range: 50~5000 milliseconds;
Default: 250 milliseconds)
9. Press the Volume button (
MEMBER 1:NULL
back next chg
NIGHT :NULL
back show chg
DOOR PHONE
bksp show chg
LOCK OPEN_T: 250
back next chg
V
) to return the DB Item Select Screen.
Emerald ICE Installation, Programming & Maintenance Manual
h
button
A-7