Automatic Co Line Ringing Modes - Tadiran Telecom Emerald ICE Installation & Maintenance Manual

Automatic CO Line Ringing Modes

12.3
Description
The system can be programmed to follow a seven day twenty‐four hour time
schedule that will automatically switch incoming CO lines to their programmed
Day, Evening or Noon ringing status and destinations. The programmed timed
switching of ringing modes is flexible and can be broken down into individual
tenant groups. For manual changing of ringing modes (Day, Evening, Noon), see
CO Line Ringing Modes (
Administration.
Automatic CO Line Ringing time settings must be programmed in Time Switching
and set for seven day a week.
The system Ringing Mode must be set to Time Mode for Automatic CO Line
Ringing.
When programming Time – Service Mode switching, the enter time represents the
time of day that the service mode will change to the associated Service Mode.
Default Settings:
The system is set to Day Mode Operation.
The Time Switching programming is set to operate (when "Time" mode selected)
in Day Mode from 8am to 5pm, Monday through Friday; Noon Mode from 12
noon to 1pm, and Evening Mode at all other times.
The "Noon" Mode is used only when a 4VAA Automated Attendant Card is
installed on your system.
Deluxe Telephone Programming
1. Access the Deluxe Telephone Programming Features as described in Section
3.2.
2. Enter 08-15 , then press the softkey beneath save . This advances to
TIME SWITCHING programming screen.
3. Enter 1 for Tenant Group 1; 2 for Tenant Group 2; or 3 for Tenant Group 3
and press the softkey beneath save
displays.
p63
PGM
) from the Attendant phone or Attendant
.
The first day of the week
Emerald ICE Installation, Programming & Maintenance Manual
SUNDAY
( )
12-5