Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 141

5-52
Emerald ICE Installation, Programming & Maintenance Manual
vi. Press the Hold button (
or press the Volume button (
Selection Screen or exit programming.
o. Enter 06-02 ‐ Tenant Group ‐ 03 (VM Table – Disconnect Digit, where
1‐3 = Tenant Group) and press the softkey beneath save .
Press the softkey beneath chg .
i.
ii. Enter the digits required to force disconnect of the active port.
iii. Press the softkey beneath save .
iv. Press the softkey beneath next to continue programming the
various call handling digits (Prefix/Suffix).
v. Press the Hold button (
or press the Volume button to return to the DB Item Selection
Screen or exit programming.
p. Enter 03-34-01 (VM Dialing Ratio – Tone Time) and press the
softkey beneath save . This advances to VM DIALING RATIO – TONE
TIME programming screen.
Press the softkey beneath chg until the appropriate Tone Time
i.
displays. Times can be 60 , 90 , 120 or 150 milliseconds. Tone
time is the minimum duration of DTMF tones delivered to the
voicemail analog port for voice processor call processing.
ii. Press the softkey beneath next to program Inter‐Digit Time. Or...
iii. Press the Hold button (
or press the Volume button (
Selection Screen or exit programming.
q. Enter 03-34-02 (VM Dialing Ratio – Inter‐Digit Time) and press the
softkey beneath save . This advances to VM DIALING RATIO –
INTER-DIGIT TIME programming screen.
Press the softkey beneath chg until the appropriate Inter‐Digit
i.
Time displays. Times can be 60 , 90 , 120 or 150 milliseconds.
Inter‐Digit Time is the minimum duration of time between tones
delivered to the voicemail analog port for voice processor call
processing.
ii. Press the Hold button (
or press the Volume button (
Selection Screen or exit programming.
h
) to return to the previous menu level
v
)to return to the DB Item
h
) to return to the previous menu level
h
) to return to the previous menu level
v
) to return to the DB Item
h
)to return to the previous menu level
v
)to return to the DB Item