Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 160

Program Call Abandon Timers as required, to match CO operation. (03‐41 and
03‐42):
6. At the DB Item Select Screen enter 03-42 and press the softkey beneath
save for Talk ABANDON (Call Abandon during conversation "talk"
mode.) or 03-43 and press the softkey beneath save for HOLD
ABANDON (Call Abandon during on hold mode.)
7. Press the softkey beneath chg to select the desired values. Available
selections are 50 ‐ 1000 , in increments of 50 milliseconds.
8. Press the Volume button (
exit programming.
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. Select RP, CO Line from the menu bar to display the following window.
Program CO Lines for Call Abandon:
3. Using the drop‐down list in the CO Line: field, select a CO Line to
program for Call Abandon.
4. Click on the check box in the Call Abandon field to allow or disallow the
Call Abandon feature for the CO Line.
5. Click on the Update button, follow the prompts and repeat steps 3 and 4
for other CO lines, as necessary.
v
) to return to the DB Item Select screen or
Emerald ICE Installation, Programming & Maintenance Manual
6-11