Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 268

Deluxe Telephone Programming
N/A
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. From the toolbar select RP, Feature Key Programing, DSS to display the
following:
DSS Selection
Feature Key Display
Programming Area
3. Using the drop‐down list in the DSS Unit No. field in the DSS Selection
area of the window, select a DSS Unit Number. Up to 12 DSS Units can be
programmed.
4. In the Feature Key Display area of the window, click on a DSS Key
number in the Key No. column. The Directory Type and Dir No. are
displayed to the right for the Key No. selected.
5. In the Programming Area of the window, the Key No., Dir Type and Dir
No. will be dislpayed after clicking on a Key No. in the table above. Select
either Extension, CO Line, or Conference Room in the Dir Type drop down
list.
6. Also in the Programming Area of the window, select a Dir No. from 400 ‐
472 in the Dir No. drop‐down list.
7. Click on the
the Feature Key Display area of the window.
button to apply the assignment. It will be displayed in
Emerald ICE Installation, Programming & Maintenance Manual
Apply Button
8-7