Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 340

6. Press the Volume button (
Screen or press the softkey beneath next to enter another CO Line Group
number for which the directory number is to be swapped.
7. Continue making other programming changes or exit the programming
mode.
RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. Select RP, C.O. Line Application, CO Line Group Setting from the toolbar
to display the following window.
3. Using the drop‐down list in the CO Route field, select a CO Line Group
Number (1‐8).
4. Using the drop‐down list in the select another CO Line Group Number to
swap this directory number with (9, 800‐809).
5. Click on the Update button and follow the prompts to save the changes to
the database. Repeat steps 3 and 4 to swap other CO Line Groups, as
necessary.
6. Continue other programming or click on the Close button to close the
window without making changes or click on the Update button and follow
the prompts to save the database changes.
v
) to return to the Database Item Select
Emerald ICE Installation, Programming & Maintenance Manual
11-11