Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 352

RMP Programming
1. Access the RMP using the procedures described in Section 3.3.
2. Select RP, System Application, Configuration Copy from the toolbar to
display the following window.
Extension
Copy
Area
CO Line
Copy
Area
3. Using the drop‐down lists in the CO Line Copy Area of the window
above, Select CO Line DIR No. to copy for both Individual: and Group:.
(Individual CO Line directory numbers 700‐756; Group CO Line directory
numbers 748‐755). These are performed using the Individual (one at a
time) programming method. Thus, the Copy button must be clicked after
each Individual: or Group: CO Line directory number of the CO Line has
been programmed for copying to a destination CO Line DIR. No. or CO
Group:.
4. Repeat step 3 to copy CO Line DIR. No.: as necessary.
5. Click on the Close button to close the window without making changes or
click on the Update button and follow the prompts to save the database
changes.
Emerald ICE Installation, Programming & Maintenance Manual
12-11