Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 292

10. Press the softkey beneath chg until the appropriate baud rate displays.
Selections are 1200 and 2400 .
11. Press the Volume button (
Screen or exit programming.
RMP Programming
Remote Programming setup must be accomplished via local RMP.
1. Access the RMP using the procedures described in Section 3.3.
2. From the toolbar select RP, System Application, General Settings to
display the following:
To program Auto Log‐Off and/or Log‐On Again:
3. Using the drop‐down lists in the Auto Log Off Time: and Log On Again
Time: fields, select a value for each field. Auto Log Off Time: is set to
determine how long an Emerald ICE connection will stay connected before
automatically being terminated. Log On Again Time: is set to determine
how long the Emerald ICE system will wait before accepting a valid
password for programming whenever the wrong password has been
entered three times.
4. Click on the Close button to close the window without making changes or
click on the Update button and follow the prompts to save the database
changes.
v
) to return to the DB Item Selection
Emerald ICE Installation, Programming & Maintenance Manual
8-31