Call Operator / Attendant - Tadiran Telecom Emerald ICE Installation & Maintenance Manual

8.4
8-8
Emerald ICE Installation, Programming & Maintenance Manual
8. Click on the Close button to close the window without making changes or
click on the Update button and follow the prompts to save the database
changes.

Call Operator / Attendant

Description
The extension that is programmed as the Attendant may receive multiple internal
calls via the programmed Operator Code. The Operator Code is 0 at default.
The Operator Code is in addition to the default assigned three‐digit intercom
number for the extension.
The attendant three‐digit extension number can be assigned to any feature button.
Default Settings:
Numbering Plan – Operator Code – Length is set to 1 (one).
Numbering Plan – Operator Code – Leading is set to 0 (zero).
Attendant – Tenant Group 1 is set to extension 401.
Attendant – Tenant Group 2, and 3 is set to Null (none).
Attendant – Alternate ‐ Tenant Group 1, 2, and 3 is set to Null (none).
Deluxe Telephone Programming
1. Access the Database Item Selection Screen using the procedures in Section
3.2.
Program Operator Code:
2. Enter 08-09-14-01 and press the softkey beneath save . This advances
to the Operator Code‐ LENGTH (the length of this code may be 1‐4 digits)
programming screen or enter 08-09-14-02 and press the softkey
beneath save . This advances to the Operator Code‐ LEADING
programming screen.
3. Press the softkey beneath chg to change values for either LENGTH or
LEADING . For LENGTH you are selecting the appropriate number of
digits to dial for the operator code displays. For LEADING you are
entering the actual code necessary for the attendant. For example, if Length
is set to 1, the entire code is the "Leading Digit" (typically "0.") If the
Length is 2, the resulting code will be two digits. The Leading Digit may