Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 218

Each of the calls involved in a holding conference will be placed on Exclusive
Hold.
When the controlling party exits a conference, the most recently invited internal
party will be designated as the new controlling party.
When a conference is established, each party will hear a burst of conference tone
when the Conference Tone is enabled.
The Unsupervised Conference feature code
on any available programmable Feature/DSS button.
Only the Controller of an Unsupervised Conference may rejoin an Unsupervised
Conference.
Conference can only be established at a Deluxe Telephone.
Default Settings
Call Handling – CO Line Conference = 3 CO Lines. (Range is None/2/3.)
Call Handling – Unsupervised Talk Time = 0 (unlimited). (Range is 0‐120 in
10‐minute increments.)
Call Handling – Conference Tone = Y. (Range is Y/N.)
CO Line – Call Abandon = Y. (Range is Y/N.)
Deluxe Telephone Programming
1. Access the Deluxe Telephone Programming Features as described in Section
3.2.
Program the maximum number of CO Lines that may be in a conference:
2. Enter 03-01 and press the softkey beneath save . This advances to the
TRUNK CONF. programming screen.
3. Press the softkey beneath chg until the appropriate value displays
( NO / 2LNS / 3LNS ). These are the number of CO lines that will be allowed
in a conference.
4. Press the Volume button (
Program the Unsupervised Conference Time:
5. Enter 03-38 and press the softkey beneath save . This advances to the
CONF. TALK_T programming screen.
6. Press the softkey beneath chg to select the Unsupervised Conference
Time. Available selections are 0-120 minutes in increments of 10 minutes.
7. Press the Volume button (
p77
PGM
v
) to return to the DB Item Select Screen.
v
) to return to the DB Item Select Screen.
Emerald ICE Installation, Programming & Maintenance Manual
may be programmed
7-37