Warning Tone / CO Line Call Limiter
7.25
Description
An extension can be limited to calls that are within a specific programmed time.
The Emerald ICE can be set to warn an extension that the time has expired thereby
advising the user to disconnect. In this mode, a system Warning Tone is heard
repeatedly when the timer has expired. This feature is useful in a lobby or retail
environment where lengthy calls are to be discouraged.
The Call Limiter can also be deployed with greater call control. In this mode,
moments after the warning tone is heard the call is disconnected automatically by
the system.
The CO Line Call Limiter can be set for extensions on a per extension basis and
according to call type (outgoing or incoming or both).
This feature is not recommended as a Toll Saver option and should be used only
for specific applications.
Additional calls can be made at the extension following the expiration of the
Warning Tone/Drop Call operation.
Default Settings:
Extension – Warning Tone = N (Range is Y/N.)
Extension – Drop Call In = N (Range is Y/N for each extension.)
Extension – Drop Call Out = N (Range is Y/N for each extension.)
Call Handling – Warning Time – Outgoing Call = 5 (Range is 1‐30 minutes.)
Call Handling – Warning Time – Incoming Call = 5 (Range is 1‐30 minutes.)
7-76
Emerald ICE Installation, Programming & Maintenance Manual
Need help?
Do you have a question about the Emerald ICE and is the answer not in the manual?
Questions and answers