Tadiran Telecom Emerald ICE Installation & Maintenance Manual page 249

7-68
Emerald ICE Installation, Programming & Maintenance Manual
Deluxe Telephone Programming
1. Access the Deluxe Telephone Programming Features as described in
Section 3.2 .
2. Enter 03-15 , then press the softkey beneath save . This advances to the
SLT HOOK_FLASH programming screen.
3. Press the softkey beneath show . This advances to the START screen. Press
the softkey beneath chg to change the Start range setting. This timer
indicates the minimum time that an analog/SLT must flash the hook‐switch
to be considered a valid flash‐hook request. A hook‐flash that is shorter
than this timer is considered a mistake; no action is taken.
4. Press the softkey beneath next . This advances to the END screen. Press
the softkey beneath chg to change the End range setting. This timer
indicates the Maximum time that an analog/SLT must flash the
hook‐switch to be considered a valid flash‐hook request. A hook‐flash that
is longer than this timer is considered an On‐Hook {hang up} request.
5. Continue making other programming changes or exit the programming
mode.
6. Press the Volume button (
Screen or exit programming.
v
) to return to the DB Item Selection